Dutch version



To grind products in a cylindrical way Normex calls upon her CNC-operated four-axle machine by Studer, type S40. The machine has an operating range off diameters up to 300mm, lengths to 1,000mm and weights up to 130kg. The machine is equipped with two grinding discs (grinding speed 60m/s) and inside grinding. The rotation ability of the grinding unit allows for the grinding disc to approach the unit under any angle, even inverted. Besides the S40, Normex has to its disposal five additional cylindrical and inverted grinding machines.
 
Bekijk de video


 




To suffice the special demands in accuracy and product size Normex is proud owner of adequate machineries. Besides capabilities such as flat-smoothening, round-smoothening, centre-smoothening and profile-smoothening there are also possibilities in areas such as turning, milling (by a millcutter) and laser welding. To be able to realise tolerances of ±1 µm or less, the entire Normex workshop is air-conditioned. This ensures Normex the temperature in the workshop is 20°C ±0,1°C (68,00°F) every moment of the day.

 
Including the central cooling system. For nearly all smoothening activities the same smoothening disc diameter is used, hence not every machine needing different smoothening discs. This allows Normex to cut back on the storage costs and scratch out the possibility of mistakes.
 
 
Machineries
To suffice the special demands in accuracy and product size Normex is proud owner of adequate machineries. Besides capabilities such as flat-smoothening.
 
Product showcase
To demonstrate the Normex knowledge, capabilities and operating level here are several illustrations of products that are produced by Normex FMI.
 




Normex is a registrated trademark.

Copyright © Normex Fijn Mechanische Industrie B.V. | Normex Medical B.V.